| Unit Name: | Channel.6.GW |
|
Firmware version: | NXU-2B V1.07 |
| Client/Server: | Client |
|
Serial baud rate: | 9600 |
| Comm mode: | Connectionless |
|
Serial data bits: | 8 |
| IP address: | 10.9.5.205 |
|
Serial parity: | None |
| Subnet mask: | 255.255.255.0 |
|
Serial stop bits: | 1 |
| Gateway: | 10.9.5.2 |
|
COR Priority: | Network |
| Remote IP: | 96.127.55.71 |
|
COR Sense: | Low active (H/W) |
| VOIP port: | 50694 |
|
COR inhibit time: | 0 |
| Command port: | 23 |
|
VOX/VMR hang time: | 500 |
| Vocoder: | 5. PCM 64Kbps |
|
ECHO enabled: | YES |
| Duplex mode: | Full |
|
Security level: | 0 |
| RX Delay (mS): | 0 |
|
MAC address: | 00:03:f4:0f:04:88 |
| Audio input level: | 11. 0dBm |
|
Audio output level: | 3. -30dBm (Into 600 ohms) |
| Input Boost: | No boost |
|
TX Delay (mS): | 0 |
| Operating Mode: | NXU-2B |
|
Options: | None |
| NXU-2B Dispatch Option: | Disabled |
|
VOX/VMR Sensitivity: | Medium |
| Board Level: | 1 |
|
Copyright © 2021 JPS Interoperability Solutions Inc. All Rights Reserved
